Selective Pallet Rack
The most universal pallet racking system for direct access to every pallet position.
Middleburg, Florida · Clay County
Pallet Racks & Warehouse Racking in Middleburg, FL
A lot of Middleburg storage is contractor and supply inventory: lumber, fittings, bagged goods, equipment parts. It comes in heavy, it stacks badly, and it takes over a yard or a shop floor long before anyone plans for racking.
Jacksonville Pallet Rack helps Clay County operations get that material off the ground and organized. We size industrial pallet racks and cantilever rack around what you actually handle, then provide a CAD layout with a pallet position count and an itemized quote so you can budget the project properly before ordering steel.
Why Middleburg Warehouses Work With Us
Supply and contractor inventory rarely fits a uniform pallet. Half of it is long, awkward, or bagged, and that combination is where a standard selective-only layout falls apart.
We usually end up with a mix: pallet rack bays for palletized stock, cantilever arms for pipe, lumber, and trim, and wire decking where loose material needs a solid surface. That combination is what keeps material findable instead of buried.
Beam capacity matters here more than in a typical dry-goods building, because bagged and banded product concentrates weight. We rate the system for the heaviest load you actually put on it.
Our crews cover the whole Clay County area, so scheduling does not depend on a truck coming down from out of state, and parts calls afterward go to the same team.
Free CAD layout with a pallet position count
A local Northeast Florida team, not a national call center
One point of contact for design, installation, parts, and expansion
Industries We Serve Here
Building materials
Contractor supply
Agricultural supply
Equipment dealers
Serving warehouses around the County Road 218 and Blanding Boulevard corridor.
What a Middleburg Pallet Rack Project Includes
We begin by getting specific about the material: what is palletized, what is loose, what is long, how heavy the worst case is, and how you move it — forklift, telehandler, or by hand.
From there our design team produces a CAD layout showing where pallet rack rows go, where cantilever makes more sense, the beam elevations for each, aisle widths sized to your equipment, and a total pallet position count. An itemized quote comes with it, separating steel, freight, and installation.
If part of the storage is under a canopy or in an open shed, we will note that on the drawing and spec accordingly rather than assuming everything sits in conditioned space.
Installation crews anchor uprights, level and lock beams, set decking, install row spacers, and add column protection where lift traffic is heaviest. Every bay is tagged with its rated capacity so your crew knows the limits at a glance.
Afterward we handle added bays, cantilever arm changes, replacement components, and relocation as the operation grows.
1
Free Design Consultation
We start with a conversation about your warehouse — pallet sizes and weights, forklift type, clear height, and how product moves through the building day to day.
2
CAD Layout & Quote
Our design team draws the layout showing how many pallet positions your building holds, plus beam elevations, aisle widths, and an itemized quote — usually within days.
3
The Right Rack For The Job
Selective, push back, drive-in, pallet flow, carton flow, or cantilever. We recommend the system that fits how you operate rather than a single default spec.
4
Phased Installation
You approve the layout, we order the steel, and our crew installs it anchored, leveled, labeled, and capacity-tagged — phased so your operation keeps receiving.
Pallet Rack Systems We Install in Middleburg
A full line of industrial pallet racks and warehouse racking, sized around how your building actually runs.
Push Back Pallet Rack
High-density storage where pallets are loaded from a single aisle.
Drive-In Pallet Rack
High-density storage for large quantities of similar products.
Pallet Flow Rack
First-in, first-out (FIFO) system with gravity-fed lanes.
Cantilever Rack
Open-front design for long, bulky, or irregularly shaped items.
Carton Flow Rack
Hand-picking system with gravity-fed wheel conveyors.
Recent Pallet Rack Projects
Recent pallet rack installations from around Northeast Florida, including work near Middleburg.
Get a Free Middleburg Pallet Rack Quote
Tell us about your warehouse — clear height, pallet sizes, weight, forklift type — and we will come back with a CAD layout and an itemized quote.
What you get back:
- Free CAD layout with pallet position count
- Itemized project quote
- A rack type recommendation that fits your operation
- A realistic installation timeline
Prefer to talk it through? Call (904) 712-2608 and ask for a layout.
Pallet Rack FAQs for Middleburg
Straight answers to what operators here ask most before starting a project.
Pallet Racks Near Middleburg
We install pallet racks in Middleburg and across southern Clay County, including operations along County Road 218 and the south end of Blanding Boulevard. From there our coverage extends throughout Northeast Florida.
Start Your Middleburg Warehouse Project
Free CAD layout, free pallet position count, and a local team that answers the phone. Call (904) 712-2608.