How do I choose between selective and high-density racking in Neptune Beach?

Selective teardrop rack is the default for mixed SKUs needing direct access to every pallet. Pushback stores 2–6 pallets deep with LIFO rotation by SKU; pallet flow serves FIFO and dated stock; drive-in suits bulk inventory with few SKUs; cantilever supports long loads; carton flow serves case picking. We compare your SKU quantities, rotation needs and handling equipment before recommending a system.

What size pallet rack do I need?

For standard 48-inch-deep pallets, 42-inch-deep uprights are a common starting point; common beam lengths are 96 inches for two 40-inch-wide pallets, 108 inches, and 144 inches for three pallets. Rack height follows your clear height and forklift lift height. Measure the real pallets, including load overhang, before selecting dimensions; we check handling clearance and load capacity alongside the measurements.

Can you calculate my warehouse's pallet position count?

The count depends on clear height, aisle width, pallet dimensions and the forklift you use. Our free CAD layout gives the exact pallet position count for the proposed arrangement before you buy. It accounts for columns, doors and staging space, so the count reflects working storage rather than filling the entire floor with rack.

Do you install pallet rack?

Yes. We handle design, supply and installation using experienced installation crews we schedule and manage. The agreed layout sets the work sequence; frames are anchored to the floor, beams and decking are fitted, and load plaques identify the capacities before storage begins.

Neptune Beach, Florida

Warehouse Relocation in Neptune Beach, FL

Warehouse relocation in Neptune Beach, FL needs a receiving-building plan before teardown starts. A rack row that works at the present address can conflict with columns, doors, overhead restrictions, or lift routes in the next building. For a move involving the Atlantic Boulevard corridor, we first establish possession dates, inventory buffers, and which shipments must continue while storage is transferred. Existing steel is inventoried for configuration, condition, and available load documentation. From there, a free consultation reviews labeled dismantling, transport coordination, reinstallation, and any added rack needed to make the destination work. The move scope separates reusable equipment from replacement components and identifies the installation sequence before experienced crews are scheduled and managed.

(904) 712-2608

Why Neptune Beach Warehouses Work With Us

For a Neptune Beach move, a drawing of the destination is more useful than a promise to recreate the old warehouse exactly. Buildings serving Atlantic Boulevard corridor and the wider Duval County area may provide a different dock arrangement, clear height, or column grid. We establish where inventory waits during the transfer, which rows can be dismantled first, and who controls truck bookings and receiving space. Labeling matters: frames, beams, bracing, decking, and protection should arrive in the order the new layout needs them. Damaged steel and undocumented combinations are separated for review instead of quietly carried into the new building.

You receive a coordinated scope for the rack work, not an assumption that an inventory mover covers it. We compare the reusable configuration with the loads and lift equipment planned at the destination, identify additions, and explain where new capacity documentation or professional review is needed. Delivery windows and temporary storage are agreed with your operations team so the move can be phased around your Neptune Beach dispatch requirements.

Free warehouse consultation

CAD layout with position counts

Installation planned around your operation

Pallet rack frames and beams in a warehouse

Warehouse Planning in This Area

Nearby areas in this service territory include Atlantic Boulevard corridor, Neptune Beach commercial district.

Order fulfillment

Retail back-stock

Food service

Small-batch manufacturing

Warehouse Move Sequence

Teardown, labeled components, transport coordination, and reinstallation planned around the new building.

Inventory and label

Record frame profiles, beam lengths, connectors, load documentation and visible damage. Label reusable components by destination zone before dismantling starts.

Plan the receiving building

Draw rack rows around columns, doors, access routes, clear height and lift equipment. Our team handles the permit side for you.

Teardown and coordinate transport

Agree a phased work sequence, isolate unloaded rows, dismantle the rack, bundle components and coordinate loading and delivery with the transport provider.

Reinstall and hand over

Anchor and align approved components in the new layout, install protection, verify the finished configuration and document capacities before inventory returns.

What a Warehouse Relocation Project Includes

The Neptune Beach project begins with a warehouse needs analysis. Send the floor plan, clear height, product dimensions and weights, stock quantities, and handling equipment details. We ask specifically about mixed service inventory in a limited commercial footprint and the work needed for small-order dispatch. For warehouse relocation, the technical review covers operating dates, reusable steel, and destination-building constraints; a photo alone cannot establish an acceptable load or confirm that reused components belong together.

The receiving-building layout comes before teardown. We record both Neptune Beach addresses, column spacing, dock positions, clear height, and the lift fleet. Rack frames and beams are inventoried for manufacturer, connector type, dimensions, condition, and available capacity documentation. The CAD plan identifies reusable rows, damaged parts that cannot simply be carried over, and additions of new rack where more positions or different bay spacing are needed. Our team handles the permit side for you.

The move sequence accounts for Atlantic Boulevard access and the practical work needed for small-order dispatch. Cleared rack sections are isolated, components labeled by destination zone, then dismantled and bundled. Transport coordination covers loading order, component protection, delivery windows, and receiving space. We plan inventory handling responsibilities with your team so steel is not delivered into occupied aisles. Reinstallation follows the reviewed drawing, with anchoring, alignment, bracing, protection, and capacity documentation checked before pallets return.

At handover, your team reviews the drawing, operating limits, load information, and remaining punch-list items. We discuss which frames and beams have documentation and which need replacement as an operating check rather than leaving the crew with a position count alone. Added levels and later warehouse relocation are assessed against the installed system. Changes to beam elevations, row location, or load type may require an updated capacity review before use.

Businesses changing warehouse addresses

Consolidating storage from several buildings

Moving a pick line while shipping continues

Reusing documented rack and adding missing components

Call (904) 712-2608

Recent Pallet Rack Projects

A look at recent pallet rack installations across Northeast Florida.

Selective pallet rack installation with green frames and orange beams

Tall selective pallet rack rows with wire decking

Drive-in pallet rack bays installed in a warehouse

Carton flow rack levels with roller beds below pallet rack bays

Cantilever rack columns with orange arms

Rows of pallet rack installed in a new warehouse building

Multiple rows of pallet rack bays with wire decking

Wide view of pallet rack rows across a warehouse floor

View More Projects

Get a Warehouse Relocation Quote for Your Neptune Beach Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (904) 712-2608.

Jacksonville Pallet Rack

1248 Edgewood Ave. W

Ste. 3 #185

Jacksonville, FL 32208

(904) 712-2608

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Jacksonville Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.